Waste Water Treating And Disposal

Hotel Golden Flower Bandung

9 – 11 Desember 2014 | 08.00-16.00 WIB


Satisfactory disposal of wastewater, whether by surface, subsurface methods or dilution, is dependent on its treatment prior to disposal.  Adequate treatment is necessary to prevent contamination of receiving waters to a degree which might interfere with their best or intended use, whether it be for water supply, recreation, or any other required purpose.

Wastewater treatment consists of applying known technology to improve or upgrade the quality of a wastewater.  Usually wastewater treatment will involve collecting the wastewater in a central, segregated location (the Wastewater Treatment Plant) and subjecting the wastewater to various treatment processes.  Most often, since large volumes of wastewater are involved, treatment processes are carried out on continuously flowing wastewaters (continuous flow or “open” systems) rather than as “batch” or a series of periodic treatment processes in which treatment is carried out on parcels or “batches” of wastewaters.  While most wastewater treatment processes are continuous flow, certain operations, such as vacuum filtration, involving as it does storage of sludge, the addition of chemicals, filtration and removal or disposal of the treated sludge, are routinely handled as periodic batch operations.

Wastewater treatment, however, can also be organized or categorized by the nature of the treatment process operation being used;  for example, physical, chemical or biological.  Examples of these treatment steps are shown below.  A complete treatment system may consist of the application of a number of physical, chemical and biological processes to the wastewater.


After completing Wastewater Treatment& Disposal, students will be equipped with a basic understanding of the following:

  • How to identify the various forms of biological growth
  • Available disinfectant technologies
  • Measurement and monitoring systems
  • Feeding systems and requirements
  • Environmental and safety concerns associated
  • How to implement a robust control plan


  1. Introduction to Waste Water Treatment
  2. Solids Storage and Transport
  3. Wastewater Treatment Methods
  • Physical
  • Chemical
  • Biological
  1. Conditioning
  2. Thickening
  3. Dewatering
  4. Stabilization
  5. Thermal Processing
  6. Disposal method of Wastewater
  7. Process Residuals
  8. Types of Process Residuals
  9. Design Considerations and Criteria
  10. Residuals Handling Considerations


 Riyanto, S.Pd., M.Si., Ph.D.


Presentation, Discussion, Case Study, Evaluation


This training is intended for workers in the department of K3 and or executor / process engineer at a wastewater treatment operator or WWTP


Certificate, Training Module (Hard and Soft copy (USB Flash Disk), Stationeries: NoteBook and Ballpoint, Souvenir (Jacket or waistcoat or T-Shirt), Bag or backpackers,  Training Photo, Training room with full AC facilities and multimedia, Once lunch and twice coffeebreak every day of training, Qualified instructor,



Jl.Anggun Utara Blok P-25, Graha Estetika

Pedalangan, Banyumanik – Semarang

Phone : 024-70196308

Email  : evioplus@yahoo.com

: yopi@evioplus.com

In House Training: Depend on request

Yopi : 085 225 899 555

Pin BB: 76877A7D

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.